# File generated by XFdrake. # ********************************************************************** # Refer to the XF86Config(4/5) man page for details about the format of # this file. # ********************************************************************** Section "Files" RgbPath "/usr/X11R6/lib/X11/rgb" # Multiple FontPath entries are allowed (they are concatenated together) # By default, Mandrake 6.0 and later now use a font server independent of # the X server to render fonts. FontPath "/usr/X11R6/lib/X11/fonts/TrueType" # FontPath "/usr/share/fonts/truetype/" FontPath "/usr/share/fonts/" FontPath "unix/:-1" FontPath "/usr/X11R6/lib/X11/fonts/misc/:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/Type1/" FontPath "/usr/X11R6/lib/X11/fonts/Speedo/" FontPath "/usr/X11R6/lib/X11/fonts/misc/" FontPath "/usr/X11R6/lib/X11/fonts/75dpi/" FontPath "/usr/X11R6/lib/X11/fonts/100dpi/" FontPath "/usr/X11R6/lib/X11/fonts/local/" # FontPath "/usr/XF40/lib/X11/fonts/100dpi/" # FontPath "/usr/XF40/lib/X11/fonts/75dpi/" # FontPath "/usr/XF40/lib/X11/fonts/CID/" # FontPath "/usr/XF40/lib/X11/fonts/PEX/" # FontPath "/usr/XF40/lib/X11/fonts/Speedo/" # FontPath "/usr/XF40/lib/X11/fonts/Type1/" # FontPath "/usr/XF40/lib/X11/fonts/cyrillic/" # FontPath "/usr/XF40/lib/X11/fonts/encodings/" # FontPath "/usr/XF40/lib/X11/fonts/latin2/" # FontPath "/usr/XF40/lib/X11/fonts/local/" # FontPath "/usr/XF40/lib/X11/fonts/misc/" EndSection # ********************************************************************** # Server flags section. # ********************************************************************** Section "ServerFlags" # Uncomment this to cause a core dump at the spot where a signal is # received. This may leave the console in an unusable state, but may # provide a better stack trace in the core dump to aid in debugging #NoTrapSignals # Uncomment this to disable the server abort sequence # This allows clients to receive this key event. #DontZap # Uncomment this to disable the / mode switching # sequences. This allows clients to receive these key events. #DontZoom # This allows the server to start up even if the # mouse device can't be opened/initialised. AllowMouseOpenFail EndSection # ********************************************************************** # Input devices # ********************************************************************** # ********************************************************************** # Keyboard section # ********************************************************************** Section "InputDevice" Identifier "Keyboard1" Driver "Keyboard" Option "AutoRepeat" "250 30" Option "XkbRules" "xfree86" Option "XkbModel" "pc105" Option "XkbLayout" "us" EndSection # ********************************************************************** # Pointer section # ********************************************************************** Section "InputDevice" Identifier "Mouse1" Driver "mouse" Option "Protocol" "ExplorerPS/2" # Option "Protocol" "IMPS/2" # Option "Device" "/dev/psaux" Option "Device" "/dev/input/mice" Option "Buttons" "7" Option "ZAxisMapping" "6 7" Option "SampleRate" "400" # Option "Emulate3Buttons" # Option "Emulate3Timeout" "50" # ChordMiddle is an option for some 3-button Logitech mice # Option "ChordMiddle" EndSection Section "InputDevice" Identifier "Mouse2" Driver "mouse" Option "Protocol" "IMPS/2" Option "Device" "/dev/psaux" Option "Buttons" "5" Option "ZAxisMapping" "4 5" EndSection Section "Module" # This loads the DBE extension module. Load "dbe" Load "glx" Load "v4l" # This loads the miscellaneous extensions module, and disables # initialisation of the XFree86-DGA extension within that module. Load "extmod" # SubSection "extmod" # Option "omit xfree86-dga" # EndSubSection # This loads the Type1 and FreeType font modules Load "type1" Load "freetype" # Load "xtt" Load "speedo" EndSection # ********************************************************************** # Monitor section # ********************************************************************** # Any number of monitor sections may be present Section "Monitor" Identifier "Sony 200ES" VendorName "" ModelName "" # HorizSync is in kHz unless units are specified. # HorizSync may be a comma separated list of discrete values, or a # comma separated list of ranges of values. # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S # USER MANUAL FOR THE CORRECT NUMBERS. HorizSync 30-70 # VertRefresh is in Hz unless units are specified. # VertRefresh may be a comma separated list of discrete values, or a # comma separated list of ranges of values. # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S # USER MANUAL FOR THE CORRECT NUMBERS. VertRefresh 50-120 Modeline "640x480" 36.00 640 696 752 832 480 481 484 509 -hsync -vsync Modeline "800x600" 56.30 800 832 896 1048 600 601 604 631 +hsync +vsync Modeline "1024x768" 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync #Modeline "1280x1024" 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsynco #Modeline "1280x1024" 108.00 1280 1344 1456 1688 1024 1025 1028 1066 +hsync +vsync # 512x384 @ 78 Hz, 31.50 kHz hsync Modeline "512x384" 20.160 512 528 592 640 384 385 388 404 -HSync -VSync # 512x384 @ 85 Hz, 34.38 kHz hsync Modeline "512x384" 22 512 528 592 640 384 385 388 404 -HSync -VSync # Low-res Doublescan modes # If your chipset does not support doublescan, you get a 'squashed' # resolution like 320x400. # 320x200 @ 70 Hz, 31.5 kHz hsync, 8:5 aspect ratio Modeline "320x200" 12.588 320 336 384 400 200 204 205 225 Doublescan # 320x240 @ 60 Hz, 31.5 kHz hsync, 4:3 aspect ratio Modeline "320x240" 12.588 320 336 384 400 240 245 246 262 Doublescan # 320x240 @ 72 Hz, 36.5 kHz hsync Modeline "320x240" 15.750 320 336 384 400 240 244 246 262 Doublescan # 400x300 @ 56 Hz, 35.2 kHz hsync, 4:3 aspect ratio ModeLine "400x300" 18 400 416 448 512 300 301 302 312 Doublescan # 400x300 @ 60 Hz, 37.8 kHz hsync Modeline "400x300" 20 400 416 480 528 300 301 303 314 Doublescan # 400x300 @ 72 Hz, 48.0 kHz hsync Modeline "400x300" 25 400 424 488 520 300 319 322 333 Doublescan # 480x300 @ 56 Hz, 35.2 kHz hsync, 8:5 aspect ratio ModeLine "480x300" 21.656 480 496 536 616 300 301 302 312 Doublescan # 480x300 @ 60 Hz, 37.8 kHz hsync Modeline "480x300" 23.890 480 496 576 632 300 301 303 314 Doublescan # 480x300 @ 63 Hz, 39.6 kHz hsync Modeline "480x300" 25 480 496 576 632 300 301 303 314 Doublescan # 480x300 @ 72 Hz, 48.0 kHz hsync Modeline "480x300" 29.952 480 504 584 624 300 319 322 333 Doublescan EndSection Section "Monitor" Identifier "TV" VendorName "" ModelName "" HorizSync 30-50 VertRefresh 60 EndSection # ********************************************************************** # Graphics device section # ********************************************************************** Section "Device" Identifier "Generic VGA" Driver "vga" EndSection Section "Device" Identifier "Matrox" Driver "mga" EndSection Section "Device" Identifier "Geforce2MX" VendorName "Unknown" BoardName "Unknown" Driver "nvidia" Option "NvAGP" "1" Option "NoLogo" "1" Option "CursorShadow" "On" EndSection Section "Device" Identifier "TwinViewTV" VendorName "Unknown" BoardName "Unknown" Driver "nvidia" Option "IgnoreEDID" "1" Option "TwinView" Option "NvAGP" "3" Option "DMPS" Option "SecondMonitorHorizSync" "30-50" Option "SecondMonitorVertRefresh" "60" Option "TwinViewOrientation" "Clone" Option "MetaModes" "640x480,640x480" Option "TVOutFormat" "COMPOSITE" Option "TVStandard" "NTSC-M" Option "ConnectedMonitor" "crt,TV" EndSection # ********************************************************************** # Screen sections # ********************************************************************** Section "Screen" Identifier "screen1" Device "Geforce2MX" Monitor "Sony 200ES" DefaultColorDepth 24 Option "TwinView" Option "Second MonitorHorizSync" "30-70" Option "Second MonitorVertRefresh" "50-120" Option "MetaModes" "1280x1024,1280x1024; 1152x864,1152x864; 1024x768,1024x768; 800x600,NULL; 640x480,NULL; 512x384,NULL; 480x300,NULL; 400x300,NULL; 320x240,NULL; 256x224,NULL" # Option "MetaModes" "1152x864,1152x864; 1024x768,1024x768; 800x600,NULL; 640x480,NULL; 512x384,NULL; 480x300,NULL; 400x300,NULL; 320x240,NULL; 256x224,NULL" Option "TwinViewOrientation" "LeftOf" Subsection "Display" Depth 8 Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480" "512x384" "480x300" "400x300" "320x240" "256x224" ViewPort 0 0 EndSubsection Subsection "Display" Depth 16 Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480" "512x384" "480x300" "400x300" "320x240" "256x224" # Modes "1152x864" "1024x768" "800x600" "640x480" "512x384" "480x300" "400x300" "320x240" "256x224" ViewPort 0 0 EndSubsection Subsection "Display" Depth 24 Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480" "512x384" "480x300" "400x300" "320x240" "256x224" # Modes "1152x864" "1024x768" "800x600" "640x480" "512x384" "480x300" "400x300" "320x240" "256x224" ViewPort 0 0 EndSubsection Subsection "Display" Depth 32 Modes "1024x768" "800x600" "640x480" ViewPort 0 0 EndSubsection EndSection Section "Screen" Identifier "screen2" Device "Matrox" Monitor "Sony 200ES" DefaultColorDepth 24 Subsection "Display" Depth 8 Modes "1280x1024" "1024x768" "800x600" "640x400" ViewPort 0 0 EndSubsection Subsection "Display" Depth 16 Modes "1280x1024" "1024x768" "800x600" "640x480" ViewPort 0 0 EndSubsection Subsection "Display" Depth 24 Modes "1280x1024" "1024x768" "800x600" "640x480" ViewPort 0 0 EndSubsection Subsection "Display" Depth 32 Modes "1024x768" "800x600" "640x480" ViewPort 0 0 EndSubsection EndSection Section "Screen" Identifier "tv" Device "TwinViewTV" Monitor "TV" DefaultColorDepth 24 Subsection "Display" Depth 16 Modes "640x480" ViewPort 0 0 EndSubsection Subsection "Display" Depth 24 Modes "640x480" ViewPort 0 0 EndSubsection EndSection Section "ServerLayout" Identifier "layout1" Screen "screen1" InputDevice "Mouse1" "CorePointer" InputDevice "Keyboard1" "CoreKeyboard" EndSection Section "ServerLayout" Identifier "tv" Screen "tv" InputDevice "Mouse2" "CorePointer" InputDevice "Mouse1" "SendCoreEvents" InputDevice "Keyboard1" "CoreKeyboard" EndSection